Runup Data for Bali

The following table contains both the raw runup data as recorded in the field and corrected runup data that have been adjusted for the difference in the tidal level at the time of tsunami attack and the time of the runup measurements. A raw runup value represents the vertical height the tsunami reached at a measurement location above the sea level (SL) at the time of measurement. A corrected runup value represents the vertical height the tsunami reached at a measurement location above mean sea level (MSL).

PlaceRunupRating *TimeDate LatitudeLongitude
(m above SL)(m above MSL)(local)(deg:min:sec, South)(deg:min:sec, East)
Antap4.454.1A12:40June 208:31.65114:59.72
Legian<11.0-10:55June 208:42:34.5115:09:56.6
Pakutatan3.352.8A14:45June 208:26.02114:49.41
Pandesoka4.243.7-15:00***June 208:31:35.8114:59:40.8
Pandesoka4.12-15:00***June 208:31:35.8114:59:40.8
Pengraguan3.703.2A14:07June 208:27.80114:54.46
Prancak1.03--14:45June 20****
Ranbutsiwi3.102.7A15:26June 208:24.30114:46.03
Slabih3.102.6A13:45June 208:28.48114:55.82
Tanah Lot<2<2-12:20June 208:37:11.9115:05:08.8
*An evaluation of the runup-measurement accuracy was made during the field survey by some of the survey teams; ratings on a subjective scale of A to C were assigned to each measurement on the basis of the surveyor's confidence in the accuracy of the respective measurement.

**Some survey teams did not have GPS units and consequently were unable to record the measurement location.

***Time is approximate

Corrected Runup Source:

Tsugi et al. "Field Survey of the East Java Earthquake and Tsunami of June 3, 1994." Pure and Applied Geophysics 144.3/4 (1995).

[Help] [Table of Contents] [Events] [East Java]